The 5.5dBi APXtender Indoor Rubber Duck Omnidirectional Antenna provided by Wireless Interactive is used to extend the range of indoor access points or client bridges in 802.11 2.4GHz wireless LAN environments. The antenna features a 360 Degree Horizontal Transmission Pattern and a 50 Degree Vertical Transmission Pattern. The transmit/receive element can be tilted in relation to the base to direct signal where it is needed (0, 45, 90 degrees). The antennas are available in various connectors to fit most wireless radio equipment.

The InWave Series of indoor antenna systems offered by Wireless Interactive are constructed of UL94-V0 white ABS plastic. The low profile attractive styling blends well in almost any office or home environment. Wall mounting is simple with 4 supplied screws and drywall anchors. The antenna comes with an N Female connector standard.

The TriBand APXtender Indoor Rubber Duck Omnidirectional Antenna provided by Wireless Interactive is used to extend the range of indoor access points or client bridges in 2.4GHz, 5.3GHz and 5.8GHz wireless LAN environments. The antenna is a "TriBand"� rather than "Wide Band" antenna design in that it will reject out of band signals between the bands of interest. This feature helps to minimize interference and system noise. The antenna features a 360 Degree Horizontal Transmission Pattern and a 90 Degree Vertical Transmission Pattern. The transmit/receive element can be tilted in relation to the base to direct signal where it is needed (0, 45, 90 degrees). The antennas are available in various connectors to fit most wireless radio equipment.

The 5dBi WIIN24-5OD is used to extend the range of indoor access points or client bridges in 802.11 2.4GHz wireless LAN environments. With its 5dBi gain, the omni-directional antenna can give up to 50% more range over conventional 2.2dBi rubber duck antennas. The 5 foot cable allows the antenna to be moved away from the wireless equipment for better wireless reception. The antenna features a 360 Degree Horizontal Transmission Pattern and a 28 Degree Vertical Transmission Pattern. The transmit/receive element can be tilted in relation to the base to direct signal where it is needed. The unit has a weighted rubber base to increase stability on the desktop. With its black base and light gray element, it's sleek, aesthetic design is suitable for any desktop application. The unit is supplied with 1.5 Meter (59"�) of cable terminated with RPSMA, MC Card, MMCX or RP TNC connectors.

The WIRV24-58 Rover Antenna is a high performance wireless antenna that includes its own mounting system for added convenience. The design is flexible enough that you can mount it to the left hand side or right hand side of the screen so that the antenna can be close to your WISRC PCMCIA card, regardless of which side of your laptop it is on.

The WI24 Rover Antenna is a high performance wireless antenna that includes its own mounting system for added convenience. The design is flexible enough that you can mount it to the left hand side or right hand side of the screen so that the antenna can be close to your WICDX2 PCMCIA card, regardless of which side of your laptop it is on.