The WI24EYR16 radome enclosed yagi antenna is a great choice for optimizing the range in the 2.4 GHz frequency. This antenna has a high 16 dBi gain, giving it the ability to increase range dramatically. Being radome enclosed, allows the antenna to be installed in the harshest environments. The WI24EYR16 includes and a 1 foot pigtail with N-Type connector.

The WIDC24 is a directional antenna system, which incorporates a 2-piece aluminum die cast parabolic grid type antenna reflector with the PMPF, patented 50-ohm passive feed dipole. Dipoles come in 2 basic configurations, N type Female connector and PMPF-xxP with 24"� pigtail equipped with an N type Male connector. Installation is simple with the Wireless Interactive adjustable tilt "Heavy Duty"� bracket that comes standard. The bracket accommodates poles from 1"� up to 2.5"� OD. Brackets are full galvanized for extreme corrosion protection and each reflector comes complete with stainless steel hardware and complete assembly instructions.

The Echo Series antenna system offered by Wireless Interactive is constructed of aluminum alloy with powder-coat painted finish. They come standard with an integral N Female connector and heavy duty U-bolt bracket. A cone mount bracket is also available for surface installations. The echo antenna can be used in a wide variety of wireless systems.

Offering high gain in an ultra-small aesthetically pleasing package, the 2.4GHz Mini Directional antennas are designed for the most demanding client applications. Constructed of UV resistant ABS plastic with an aluminum backplate and stainless steel mounting bracket, this rugged and weatherproof antenna will give many years of reliable service. The antenna can be mounted in Horizontal or Vertical Polarization with a quick change to the bracket mount. The bracket affords +/- 15 deg tilt adjustment. The compact low visual impact attractive styling blends well in almost any application. The antenna comes with an integral N Female connector standard.

The WIOA-2450 omni-antenna from Wireless Interactive is an omni directional antenna that will increase signal range and strength greatly in a 360 radius. The antenna includes a fitting kit that includes high quality brackets nuts, bolts and washers. With outstanding 360 degree coverage, this antenna is the perfect choice for anyone looking for omni-directional coverage.

The Omni Directional antenna systems offered by Wireless Interactive are constructed of UV-stable fiberglass. They feature 50 ohm passive feeds that come standard with type N female connectors. The 12dB has a 3 Deg Electrical Downtilt standard. It also has 24"� pigtail option with N Female or N Male connectors for direct connection to outdoor access points. They can be used in a wide variety of wireless systems.

The Horizontally Polarized Omni Directional antenna systems offered by Wireless Interactive are constructed of Rigid Aluminum Extrusion which is powder coat painted. They feature integrated 50 ohm passive feeds that come standard with type N female connectors. Horizontally polarized antennas offer the user great rejection of interference if that interference is vertically polarized, as is the case in most WLAN systems.

The 2.4GHz Flat Panel Directional antennas by Wireless Interactive Comm., Inc. offer high gain in a thin low profile package. The antennas are constructed of a gray color UV Resistant ABS plastic radome with an aluminum back plate. The antenna can be used in Horizontal or Vertical Polarization. The Die Cast Aluminum bracket affords +/- 45 deg up or down tilt adjustment and the stainless steel hardware assures a long service life. The antenna can be surface mounted or pole mounted. The antenna comes with an integral N Female connector standard.

The WIPE2419 Panel Enclosure Antenna is an excellent solution for all 2.4 GHz applications. Not only does it's patented circuit design offer high gain for a low cost, but the low profile and rugged design make it the ideal antenna for outdoor applications. The WIPE2419 features a weather-tight compartment behind the antenna to allow the direct integration of electronics, and also meets NEMA 4 requirements. Included with the WIPE2419 panel enclosure antenna is also a high-strength mounting bracket. The WIPE2419 is also used with the Wireless Interactive CPE Kit Solution ( WICPE200G ).

The panel antenna is developed to allow integration of the customers' radio equipment inside the weatherproof compartment. The radio compartment is big enough to house transceivers, amplifiers, and other electronic equipment. Two sizes are available, our regular size and a new lower-profile size. The antenna design utilizes a suspended wire element over a solid 8.5"� square backplane for more consistent performance over temperature and humidity conditions. The housing is UV stabilized ABS plastic. The backplate is alodine coated aluminum with stainless steel fasteners. All bracket fasteners are stainless steel for corrosion protection.

The sector antenna systems offered by Wireless Interactive are constructed from rigid aluminum extrusion, these units are powder coated and sealed with PTFE (Teflon) tape providing lightweight, rigid, weatherproof units. They feature 50 ohm passive feeds that come standard with type N female connectors. Two different bracket systems are offered with these antennas: A) The super heavy duty single point galvanized bracket system is designed for ease of installation and pole-top mounting B) The all stainless steel 2 point scissor bracket gives increased stability and improved downtilt adjustment accuracy. Both brackets offer 10 deg of mechanical downtilt. The N connector is positioned on the front/transmission side of the sector.

The Vertically Polarized Sector antenna systems offered by Wireless Interactive are constructed of UV stable fiberglass radomes for extremely long service life in the most demanding conditions. The antennas are constructed using corrosion resistant metal elements which are more stable than PCB based antenna systems because they don't absorb moisture, which can degrade the performance of PCB based antenna systems. The 17dB sector comes with a stainless steel scissor bracket system for ease of installation and aligning. The 9dBi sector comes with a galvanized steel bracket with stainless steel hardware.

The Vertically Polarized Sector antenna systems offered by Wireless Interactive Comm., Inc. are constructed of UV stable fiberglass radomes for extremely long service life in the most demanding conditions. The antennas are constructed using corrosion resistant metal elements which are more stable than PCB based antenna systems because they don't absorb moisture, which can degrade the performance of PCB based antenna systems. The 17dB sector comes with a stainless steel scissor bracket system for ease of installation and aligning. The 9dBi sector comes with a galvanized steel bracket with stainless steel hardware.

The Vagi Series antenna system offered by Wireless Interactive is constructed of Die Cast Aluminum Alloy with anti-corrosion alodine finish. They come standard with a choice of an N Female or N Male connector and an adjustable 45 Deg Tilt galvanized steel QuikClamp bracket which accommodates a 1" to 1.5" pole diameter. The Vagi Series antenna can be used in a wide variety of wireless systems where low cost, good performance and low wind loading are important factors. They have been approved for use by many homeowner associations with strict CC&R restrictions.